Fishing Equipment

The Series 10 Sucker Rod Overshot is a small, rugged tool designed for engaging and retrieving sucker rods, couplings, and other items from inside tubing strings.

Series 20 Short Catch Sucker Rod Overshots are designed for conditions when sucker rods, couplings, and other portions of a fish are too short for retrieval with a standard overshot.

The Hydraulic Release Overshot was designed to aid in the recovery of a stuck fish in a horizontal drilling application where normal rotation for release is not obtainable.

The Series 70 Short Catch Overshot is designed for conditions when the fish is too short to be engaged with a standard overshot.

The Series 150 Releasing and Circulating Overshot consists of three main external parts: a Top Sub, a Bowl, and a Guide. Internal catch and pack-off parts are determined by the diameter of the fish. Each assembly is designed for a maximum catch diameter.

A Series 160 Side Door Overshot is recommended when fishing for cable tools or conductor lines in cased holes. The side door overshot is run in on tubing or drill pipe.

A Lead Impression Block is an effective tool used to determine dimensions, configuration, condition, and location of the top end of a fish in the hole.

Rotary Die Collars are the simplest external catch fishing tools designed for retrieving a fish from the hole. Die Collars are available in two types: Type A and Type B.

Type A

Type A Rotary Die Collars are manufactured with an integral guide. The guide end of the die collar may be specified as flat smooth or cut-lipped.

Type B

Type B Die Collars are manufactured with a threaded bottom end for attaching a standard cut-lipped guide or wallhook guide of your choice.

Full Circle Releasing Spears are used to internally engage and retrieve all sizes of tubing, drill pipe, and casing. It may be used with internal cutters for cut and pull operations.

Releasing Spears provide a positive means to engage and retrieve an internal fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures positive engagement, easy release and re-engagement. It may be used with other equipment such as pack-off assemblies and internal cutters.

The segment-type spear grapple enhances the spear’s usefulness by providing an extended catching range beyond the maximum range of the standard one-piece grapple.

Pack-off Assemblies are available for all Spear Assemblies and are designed to efficiently pack-off all sizes of tubing and casing.

The Releasing Spear Stop Sub Assembly is an accessory designed to convert a releasing spear with a flush-type mandrel into a shouldered type spear.

The Packer Retriever Spear is designed to remove drillable full-bore packers from the well casing. With appropriate dressing, the tool can mill through the packer if necessary.

Rotary Taper Taps are the simplest, and the most economical, internal catch fishing tools designed for retrieving a fish from the hole.

The Core Type Junk Basket is an easy to use junk retrieval tool designed to effectively remove small objects such as bit cones, slips, hand tools, and tail chains from the hole.

Utilizing the principal of reverse fluid circulation, the Reverse Circulation Junk Basket has been designed to remove all types of small junk objects from the hole.

The Full Flow Reverse Circulation Junk Basket is similar to the Reverse Circulation Junk Basket. The unique difference is the Full Flow Valve Assembly that enables continuous circulation through the center thereby keeping out shale and debris while running in the hole.

The alternately long and short fingers of the junk catcher assembly extend almost to the center of the basket to form a close-fitting receptacle that will retain small pieces of junk that may impede drilling progress or hold a core sample.

The Fishing Magnet is designed to retrieve small metal, oddly shaped objects such as mill shavings, bit cones, cutters, bearings, slips, tong pins and hand tools for the bottom of the well bore.

The Ditch Magnet is the most effective means available to trap and remove metal particles from drilling mud missed by the shale shaker.

The EZ Clean™ Ditch Magnet with Rare Earth Elements is the most effective means available to trap and remove metal particles from drilling mud missed by the shale shaker. The ditch magnet will capture all magnezed metals. During milling operations, the magnet is parcularly valuable for the removal of mill cuttings and debris that cause wear on mud pumps and other equipment.

The Magna Fish™ Fishing Magnet is designed to retrieve small metal, oddly–shaped objects such as milling shavings, bit cones, cuers, bearings, slips, long pins, and hand tools from the boom of the wellbore. Typically, these objects are the result of bit failures, and accumula!on of mill cuttings, or simply accidental droppings of unmillable objects.

The Superior Hydraulic Jar is a straight pull, up only, jarring tool that utilizes a special valve section to meter oil from one side of the piston to the other side. This allows for controlled jarring action during stuck fish recovery.

The Superior Energizer is run in conjunction with a Superior Fishing Jar of the same size. Its function is to supply intensified impact during the jarring operation. Each size of Superior Energizer is designed to match a corresponding size of Superior Fishing Jar.

The Z Type Hydraulic Jar is used for light drilling, fishing, coring, reaming, testing, side tracking, and washover operations. This straight-pull jar combines the principles of mechanics and hydraulics in a simple to assemble, easy to operate design.

The Z Type Energizer is run in conjunction with a Z Type Fishing Jar of the same size. Its function is to supply intensified impact during the jarring operation. Each size of Z Type Energizer is designed to match a corresponding size of Z Type Fishing Jar.

The Surface Bumper Jar is installed in the drill string at the surface and is used whenever the downhole drilling, fishing, or washover running string becomes stuck and requires a heavy downward force to release it.

The Lubricated Fishing Bumper Sub is a dependable accessory that is suitable for all fishing operations, especially harsh, downhole applications and deep workover operations.

One of the most common tools used for any kind of fishing job is the bumper sub. The tool’s design allows full torque and unrestricted fluid circulation at all times.

The Jar Tester is a versatile machine for setting, checking, or testing pull loads of a variety of tools with outer diameters up to 11 inches. The Jar Tester is capable of exerting tension or compression loads in a controlled manner.

The Drill Pipe Safety Joint is designed for the safe and dependable release from drilling, fishing, tubing, washover, or testing strings should they become stuck.

The Tubing Safety Joint is designed for the safe and dependable release from drilling, fishing, tubing, washover, or testing strings should they become stuck.

The Washover Safety Joint is designed for the safe and dependable release from drilling, fishing, tubing, washover, or testing strings should they become stuck.

The Type J Safety Joint provides a release option from tools such as taper taps or die collars that are normally non-releasable. It also provides a way to connect or disconnect fishing string and stuck fish.

The Bi-Directional Coiled Tubing Jar is designed to hit upward and downward blows. It can be dressed to only hit up or down. These tools’ small outside diameters and shorter lengths make them ideal for milling, drilling, workover, remedial, or completion operations, especially in vertical, deviated, and ultradeep wellbores.

The double-acting, Bi-Directional Coiled Tubing Energizer is an impact enhancement tool designed for slim holes (generally a well bore less than 6 inches in diameter). Its function is to supply intensified impact during the jarring operation by providing or enhancing jar impact from energy stored within its oil-filled compression chambers.

Junk Mills are hard-faced with sintered tungsten carbide particles that mill away stuck fish that can not be retrieved with conventional fishing methods. These tools are highly resistant to impact and their super rates of penetration result in fewer round trips. Their maximum useful life is enhanced by their self-sharpening feature.

Rotary Shoes are designed in various styles and sizes to service the many different conditions encountered in fishing and washover operations.

Washover Pipe

The Welded Cup Junk Sub is an accessory tool that prevents cuttings from milling or drilling operations that are too heavy to be circulated from settling at the bottom of the hole.

The Threaded Cup Junk Sub is an accessory tool that prevents cuttings from milling or drilling operations that are too heavy to be circulated from settling at the bottom of the hole.

The T-Dog Overshot is designed to catch collared pipe or tubing and is releasable.

The automatic spring-fed knives feature of this tool prevents excessive strain from being applied from the rig floor that could cause the knives to burn or break before the cut is completed.

These quick, smooth operating tools allow for fast recovery of tubing or drill pipe. A hydraulically fed piston forces the knives of this cutter into the pipe to give the operator sensitive cutting control.

Internal Cutters are used to cut tubing, casing, and drill pipe and may also be run on sucker rods and macaroni strings.

The Internal Pressure Pipe Cutter utilizes pump pressure to actuate three carbide-coated knives to cut single and multiple strings of pipe from 4 inches O.D. to 36-inches O.D.

Fixed Blade Non-Rotating Stabilizers

Variable Blade Non-Rotating Stabilizers

The Casing Roller repairs and restores dented, collapsed, or buckled tubing or casing of any size and weight to its original inside diameter and roundness.

Obstruction-free tubing is critical for the efficient operation of many downhole tools during drilling, fishing, completion, or wireline jobs.

Obstruction-free casing is critical for the efficient operation of many downhole tools during drilling, fishing, completion, or wireline jobs.

This Type A Packer Tubing Patch is used to repair a section of damaged tubing without having to remove the entire string from the hole to replace it.

This Type A Packer Casing Patch is used to repair a section of damaged casing without having to remove the entire string from the hole to replace it.

High Pressure Type L Packer Type Casing Patches are designed to engage and seal off a properly prepared casing string. The Casing Patch design leaves the operator with a casing string that has a full-bore internal diameter.

High Pressure Type L Packer Type Casing Patches are designed to engage and seal off a properly prepared casing string. The Casing Patch design leaves the operator with a casing string that has a full-bore internal diameter.

Lead Seal Casing Patches repair properly prepared pipe without restricting the bore of the casing or tubing.

The Lead Seal Cementing Casing Patch forms a permanent sealed connection between two strings of casing and cements them together in a single operation.

The dependable Hydraulic Wireline Jar utilizes a hydraulic system that permits controlled jarring in measuring line or stranded wireline operations when electrical continuity below the jar is not required.

The simple and rugged Tubular Wireline Jar is designed for use in combination with the Hydraulic Wireline Jar or by itself as a separate tool.

The Hydraulic Rod Jar provides a dependable means for controlled jarring in sucker rod operations when electrical continuity or circulation to the tools or below the jar is not required.

Cable Guided Fishing Assemblies with Flexible Sinker Bar

The Flexible Sinker Bar Assembly is designed for use during wireline stripping operations on drilling rigs that utilize top drive systems.

The T-Bar Wireline Clamping Tool is designed for wireline diameters up to 17/32″ and wireline breaking strength of 24,500 pounds.

L44906 Flo-Tubes for grease injection control heads.

Wireline Spare Parts

This easy-to-service, hydraulic motor-driven 120-Ton Power Swivel provides smooth shock-free torque. It is rated to support tensile pipe loads of 120 tons at zero rpm and 65 tons dynamic load at 100 rpm. The compact swivel head design weighs only 2,000 lbs and fits many drilling or workover masts. A 2-3/4-inch bore gooseneck and washpipe assembly allows circulation through the 2-11/16-inch I.D. stem while rotating or in static mode.

The hydraulic motor-driven 85-Ton Power Swivel provides smooth shock-free torque. The compact swivel head design fits most drilling or workover masts and weighs only 1,163 lbs. It is rated to support tensile pipe loads of 85 tons at zero rpm and 45 tons dynamic load at 100 rpm. A 2-1/4-inch bore gooseneck and washpipe assembly allows circulation through the 2-inch I.D. stem while rotating or in static mode.

Arctic Weather 85-Ton and 120-Ton Power Swivels are enclosed in insulated, 20-foot metal containers. The containers have adjustable louvers to allow operation in warmer temperatures. Two bi-fold doors on one side and double doors at the back permit complete access.

The engine is equipped with an oil pan, coolant heaters, and an ambient air temperature sensor. The battery is enclosed in a lockable box and is equipped with a battery warmer.

The arctic weather package also features deicer injector to prevent them from icing. Fuel and hydraulic tank heaters, and a hydraulic powered hose reel. One of the back doors features a hose window for routing hoses out of the container. To retain heat, the hose window is fitted with rubber flaps and a metal door on separate skid that is pulled in and out of the container by a dual drum hydraulic winch.