Convection Heater (Explosion-Proof, Natural Convection) XB
The Norseman™ XB Series convection heater, with ratings up to 5000 watts, is designed for heating spaces where explosive substances are or may be present. The Norseman™ XB is available with either CCSAUS or CE/ ATEX approvals. All units can be fitted with an externally adjustable thermostat. With the Norseman™ XB, you get a safe and reliable heater with a handsome appearance and state-of-the-art design.

 

Specsheet

Convection Panel Heater (Explosion-Proof) XPA
The Norseman™ XPA Series explosion-proof panel heater is the latest innovation in the Norseman™ line of hazardous location heating products. The Norseman™ XPA heater is available in 120V, 208V, and 240V, 50 Hz and 60 Hz configurations. The Norseman™ XPA heater is CCSAUS certified for Class I, Divisions 1 & 2, Groups A, B, C & D. Sizes, wattages and applicable temperature codes are shown in TABLE 14.

 

Specsheet

Unit Heater (Explosion-Proof, Forced Air) XGB
The Norseman™ XGB Series hazardous environment
heater is designed to accommodate your requirements
with flexibility and ease of maintenance, even under the toughest conditions.
Norseman™ XGB unit heaters are available in two sizes,
small cabinet units with ratings of up to 10 kW and large cabinet units with ratings of up to 35 kW.

 

Specsheet

Thermostat (Explosion-Proof, Air/Liquid Sensing) XTW
The type XTW is suitable for air or liquid temperature sensing and control in all hazardous locations. For air sensing applications, a finned stainless steel thermostat well assembly is provided to enclose the thermostat bulb. For liquid sensing applications, the Norseman™ XTW has an external 1/2” (13 mm) NPT thread on the well assembly to permit easy installation into the tank wall.

 

Specsheet

Thermostat (Explosion-Proof Remote Sensing) XTB
The type XTB is normally used for remote sensing. A CSA certified packing gland is provided to allow the 57” (1448 mm) capillary to exit the x-Max® housing.

 

Specsheet

Thermostat Installation Kit XTK
The type XTK is a thermostat kit suitable for field installation into other x-Max® products, such as the Norseman™ XB explosion-proof convection heater, the Norseman™ XC explosion-proof screwplug heater or the Norseman™ XG explosion-proof unit heater. This allows these products to be stocked without thermostat and have a kit supplied when required.

 

Specsheet